If you are not hearing a sound in your headset plugged in to the ClariMate, you can try :
1. Turn the ClariMate volume up to 100 in the synth controls tab in the app
2. Turn the breath threshold down to 10 and the sensitivity up to 100 in the breath and reed parameters tab in the app
3. Use a breath plug at the bottom of the ClariMate tube (the little plugs with different diameters that came with the ClariMate in the little pocket on the right of the case)
4. Make sure you are blowing strongly so that the breath barometer in the app (on the breath and reed parameters tab) shows your breath (in red) going above the threshold (light blue)
Additionally, make sure that a Training Set is loaded onto the ClariMate. You can load a Training Set by following these instructions:
1. Go to the “Note Training” tab
2. Click or tap on the “Load/Save” button in the top right corner of the screen
3. Select the Training Set labeled “Factory” from the list of Training Sets
4. Click the “Load” button on the right hand side of the screen
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article